
What Is a Kagi Chart? How It Works and How to Read It
Learn what a Kagi chart is, how Yang and Yin lines work, and how to filter price noise cleanly. Read the full guide.
By Trader Faculty Team
Direct Answer
A Kagi chart is a time-independent Japanese price chart made of vertical lines and short horizontal steps that only turn when price moves by a set reversal amount. When price breaks above a prior high, the line thickens into a bullish Yang line; when price drops below a prior low, it thins into a bearish Yin line.
A Kagi chart is a time-independent Japanese price chart built from vertical lines connected by short horizontal steps. Instead of plotting price every hour or day, it only moves forward when price reverses by a set amount.
If you've ever stared at a busy candlestick chart, you know how tiring minor sideways wiggles can be. Small price swings often look like a big trend change, pushing you out of a good trade too early. This guide explains what a Kagi chart is, how its thick and thin lines react to supply and demand, and how it compares to other time-independent charts.
Quick Takeaways
- This chart style removes time from the horizontal axis so you can focus strictly on meaningful price swings rather than minor daily noise.
- Line thickness shows who is in control: thick Yang lines form when buyers push past a prior high, while thin Yin lines form when sellers break a prior low.
- Choosing the right reversal threshold matters because tight settings trigger frequent false turns in flat markets, while wide settings delay entries.
- Because the lines hide time and trading volume, you'll get more value from reading them alongside broader price structure than from treating them as a standalone signal tool.
What Is a Kagi Chart?
A Kagi chart is a non-time-based charting method developed in Japan in the 1870s to track rice prices, focusing solely on price direction and key breakout levels. While standard bar or candlestick charts add a new bar at the end of every fixed period, this style ignores the clock completely. Searchers often type "what is Kagi chart" when they really want to know how the lines behave in practice.
To picture how this works in practice, imagine tracking your elevation on a mountain trail. You don't mark your map every ten minutes while you're standing still at a rest stop. Instead, you only draw a new line when you climb or drop at least 100 feet from your last turn.
When you see a Kagi chart explained this way, its purpose becomes clear. If a market trades sideways in a tight range for three weeks without crossing your set price threshold, the chart stays frozen on the exact same vertical line. It only steps to the right and changes direction when price makes a move that's large enough to matter.
How a Kagi Chart Works: Lines, Steps, and Reversals
It works by extending a vertical line in the direction of the current trend until price moves against that trend by a preset reversal amount. When that threshold is reached, the chart draws a short horizontal line to the right and starts a new vertical line in the opposite direction.

Four visual features make up every Kagi chart:
- Vertical trend lines: These show the active price direction, extending upward during rallies and downward during drops.
- Shoulders: These are the short horizontal lines formed at the top of an upward move right before price turns down.
- Waists: These are the short horizontal lines formed at the bottom of a downward move right before price turns up.
- Line thickness (Yang and Yin): The thickness—and usually the color—of the vertical line shifts when price breaks past a previous turn.
The thickness change is what sets Kagi apart from basic line charts. When an upward vertical line breaks above the level of the previous shoulder, the line becomes thick (often colored green or black). Japanese traders call this a Yang line, which signals that buyers have pushed price past prior resistance.
Conversely, when a downward vertical line drops below the level of the previous waist, the line turns thin (often colored red). This is a Yin line, showing that sellers have broken through prior support.
Before reading these shifts, you must set the reversal threshold—the minimum price move required to draw a horizontal step and change direction. Charting platforms usually let you set this threshold in three ways:
- Fixed points or price units: For example, requiring a $2.00 move on a stock before drawing a turn.
- Percentage: Requiring price to reverse by a set percentage of the last price, such as 4%. Platforms use different defaults, so check the setting before you read any signals.
- Average True Range (ATR): Linking the reversal size to recent market volatility so the chart adapts when price swings widen or shrink.
How Traders Read Kagi Chart Signals
Traders read Kagi charts by watching for shifts between thin Yin lines and thick Yang lines, as well as repeated turns at similar price levels. Because minor price noise is filtered out, potential support and resistance zones stand out more clearly than on a cluttered time-based chart.
Here are the three core signals traders look for on a Kagi chart:
- Thickness reversals: A transition from a thin Yin line to a thick Yang line suggests growing buying pressure, while a shift from thick Yang to thin Yin points to growing selling pressure. Classic Kagi guides tie Yang lines to buying strength and Yin lines to selling strength, but experienced traders rarely act on thickness changes alone.
- Multi-level shoulders and waists: When several shoulders form at roughly the same price height, they mark a clear resistance ceiling where rallies keep stalling. When several waists line up near the same floor, they highlight a support zone where buyers repeatedly step in.
- Classic Japanese patterns: Some sequences, such as the "three Buddha top," can warn that an uptrend is losing steam. This pattern shows three peaks with the middle shoulder higher than the two beside it, much like a head-and-shoulders pattern.
Kagi Chart vs. Line Break Chart
Both a Kagi chart and a line break chart remove time from the horizontal axis to filter out sideways market noise, yet they measure price reversals in completely different ways. Understanding how they differ helps you pick the visual style that fits your chart-reading habits.
| Feature | Kagi Chart | Line Break Chart |
|---|---|---|
| How Reversals Trigger | Price moves against the trend by a fixed point, percentage, or ATR amount | Closing price moves past the high or low of a set number of prior lines (often three) |
| Visual Signals | Continuous line that changes thickness (Yang vs. Yin) on breakouts | Series of vertical up and down blocks that change color on reversals |
| Best Use Case | Spotting potential support and resistance levels across shoulders and waists | Catching clean momentum shifts based on closing price strength |
On Kagi, a turn can trigger as soon as price hits your reversal threshold, though some platforms use closing prices instead of intraday highs and lows. The line thickness updates the moment a prior shoulder or waist breaks. A line break chart, by contrast, only evaluates closing prices at the end of each period and waits for a close beyond the high or low of the previous blocks before drawing a reversal.
Common Mistakes and Limitations to Watch For
Removing time from a chart makes trends look cleaner, but it also hides important market context and does not eliminate false signals. Even experienced chart readers run into trouble if they forget what this style leaves out.
Watch out for these three common mistakes:
- Forgetting that time and volume are missing: A single long vertical Yang line could represent a ten-minute news spike or a slow, low-volume grind over two months. Because Kagi omits trading volume and time duration, you can't tell from the lines alone whether strong institutional participation backed a breakout.
- Setting the reversal threshold too tight: If you set a tiny reversal percentage on a volatile asset, the chart will draw dozens of rapid horizontal steps. Your line will flip back and forth between Yang and Yin constantly, creating whipsaws (frequent false reversal signals) in choppy markets.
- Setting the reversal threshold too wide: A very wide threshold filters out almost all noise. However, by the time price finally breaks a prior shoulder and turns the line thick, a large part of the move may already be over.
Conclusion
Kagi works best as a visual filter for trend direction and key price levels rather than a standalone system that tells you when to buy or sell. By stripping away time, it helps you step back from minute-by-minute price action and see whether buyers or sellers are actually breaking structural highs and lows.
To apply Kagi sensibly, start by matching your reversal threshold to the asset's typical price swings, then check a regular candlestick or bar chart to confirm volume and time context before placing any trade. Combining non-time charts with broader technical analysis concepts—such as trend structure, volume confirmation, and clear stop-loss placement—gives you a much fuller picture of market risk. Trading always carries the risk of losing money, so treat everything in this guide as educational material for your own research rather than financial advice.
Frequently Asked Questions
What is a Kagi chart used for?
Traders use it to filter out minor sideways price swings and see the broader trend direction more clearly. By removing the time axis, the chart highlights key breakout levels, support floors, and resistance ceilings without the visual clutter of small daily or hourly candlesticks.
What is the difference between Yin and Yang on a Kagi chart?
A Yang line is a thick (often green) vertical line that forms when price breaks above a previous high shoulder, signaling buyer control. A Yin line is a thin (often red) vertical line that forms when price drops below a previous low waist, signaling seller control.
Does a Kagi chart show time or volume?
No, it doesn't include a fixed time axis or trading volume bars. A single vertical line might represent a ten-minute price spike or several weeks of slow movement, which is why many traders check a standard candlestick or bar chart alongside Kagi for volume and timing context.
What is the best reversal amount for a Kagi chart?
There is no single best reversal amount because it depends on the asset's typical volatility and your trading timeframe. Traders usually set the threshold using fixed points, a percentage, or Average True Range (ATR), balancing tight settings that react faster against wider settings that avoid false turns.
What is the difference between a Kagi chart and a Renko chart?
Both Kagi and Renko charts ignore time, but they draw price differently. Renko charts plot uniform bricks of a fixed size at 45-degree angles, whereas Kagi charts draw continuous vertical lines of varying lengths that change thickness whenever price breaks past a prior shoulder or waist.
Keep learning
TA Masterclass
Reading charts one article at a time? Get the full method, in order.
10 lessons quiz
Start TA MasterclassThe Trader Faculty Team writes and reviews every guide together — pairing hands-on market experience with a curriculum-first approach to trading education. One good syllabus, taught in the order that makes you better.





