
What Is Optimal Trade Entry (OTE) in Trading?
Learn what optimal trade entry is, how the 61.8%–78.6% Fibonacci pullback zone works, and when it fails. Read the full guide.
By Trader Faculty Team
Direct Answer
Optimal Trade Entry (OTE) is a Smart Money Concepts pullback zone located between the 61.8% and 78.6% Fibonacci retracement levels, with 70.5% serving as the midpoint. Traders use this area after a strong impulsive price swing to plan entries with a tighter stop loss beyond the original swing extreme, though strong trends can reverse before reaching the zone.
Optimal Trade Entry (OTE) is a pullback trading zone that sits between the 61.8% and 78.6% Fibonacci retracement levels. Traders who follow Smart Money Concepts (SMC) use this zone to look for entries after a strong price move begins to retrace.
Chasing a fast breakout often leads to buying right at the top, only to get stopped out when price takes a normal breath. On the other hand, guessing where a pullback will end can leave you entering too early while price is still falling. This guide covers how this setup works, how to draw it step by step, and where this setup falls short.
Quick Takeaways
- OTE defines a specific pullback zone between 61.8% and 78.6% of a prior price swing rather than a single magic price point.
- Waiting for a deeper retracement narrows the distance to your stop loss, which improves your potential reward-to-risk ratio when the trend continues.
- Strong trends often bounce at shallower levels like 38.2% or 50%, meaning traders waiting for an OTE zone will miss those moves.
- Price can slice straight through the 78.6% level during a real trend reversal, so waiting for confirmation matters more than placing blind limit orders.
What Is Optimal Trade Entry (OTE)?
An optimal trade entry is a specific chart zone—spanning from the 61.8% to the 78.6% Fibonacci retracement—where traders look to enter in the direction of a new trend during a deep pullback. The concept was popularized by retail trading educator Michael Huddleston, known online as the Inner Circle Trader (ICT), as part of his Smart Money Concepts framework.
Within this OTE zone, traders also mark the 70.5% level, a reference point close to the midpoint. While the name sounds like a promise of the best possible fill, “optimal” here simply describes the balance between getting a discounted price and keeping your stop loss close to the start of the move.
Think of it like waiting for a popular winter coat to go on an end-of-season sale. Buying at full retail price in October means you definitely get the coat, while waiting for a 70% clearance markdown saves you money—but carries the risk that your size sells out before the price drops that far.
How Does the ICT Optimal Trade Entry Pattern Work?

The ICT optimal trade entry pattern works by measuring a strong directional price swing with a Fibonacci retracement tool and waiting for price to pull back into the 61.8%–78.6% window before entering. Traders rarely draw this zone on random price wiggles; instead, they look for specific chart clues first.
Before plotting the zone, traders look for two things on the chart:
- Displacement: A fast, energetic price move with large candles that shows clear momentum in one direction.
- A break in market structure: Price pushing past a previous swing high (in an uptrend) or a previous swing low (in a downtrend), signaling that buyers or sellers have taken control.
Once those pieces appear, traders watch for price to retrace into the OTE zone. Many combine the Fibonacci levels with nearby chart clues—such as an inverse fair value gap, where a failed price imbalance flips into support or resistance—to see if the pullback is actually slowing down.
| Fibonacci Level | Role in the OTE Zone | What Traders Watch For |
|---|---|---|
| 61.8% | Upper boundary (shallow edge) | First sign of buyers or sellers stepping back into the trend |
| 70.5% | Midpoint of the OTE zone | Central reference line for balancing entry price and stop distance |
| 78.6% | Deep boundary (final edge) | Last area for a pullback to hold before risking a full trend failure |
How to Draw and Use Optimal Trade Entry Step by Step
To draw an optimal trade entry on your chart, you connect the start and end of a clear impulsive swing using the Fibonacci retracement tool. The exact direction depends on whether you are looking for a bullish or bearish setup.
- Find a valid impulsive swing: In a bullish setup, spot the swing low where the strong upward move started and the swing high where it paused. In a bearish setup, spot the swing high at the top and the swing low at the bottom.
- Apply your Fibonacci tool: Drag the tool from swing low to swing high for longs, or from swing high to swing low for shorts. Make sure the 0.618, 0.705, and 0.786 levels are active in your tool settings—most charting platforms do not include 0.705 by default, so you will likely need to add it manually.
- Wait for price to enter the zone: Let price pull back into the 61.8%–78.6% area. Instead of guessing, watch how candles behave once they touch the zone—such as long wicks rejecting lower prices or a shift back upward on a lower timeframe.
- Set your stop loss and target before entering: Traders commonly place their stop loss just beyond the 100% level (the original swing low or swing high), since a move past that point cancels the setup. Profit targets are often placed near the 0% swing extreme or at a fixed reward-to-risk multiple.
Why Traders Use OTE — and When It Fails
Traders use OTE because entering on a deeper pullback allows for a tighter stop loss and a larger potential target than buying a breakout. However, waiting for deep pullbacks comes with an unavoidable trade-off: you will miss strong trends and still take losses when a pullback turns into a reversal.
Here is how the strengths and weaknesses balance out in live markets:
- Better entry location on deep pullbacks: If you buy after a 70.5% retracement instead of at the 0% swing high, your stop loss below the 100% swing low is much closer, meaning a move back to the old high can offer a larger reward relative to your risk.
- Clear invalidation point: Because the setup relies on the original swing holding, a break past the 100% level gives you an objective signal that the trade idea is wrong.
- Missed trades in fast trends: Strong, momentum-driven markets often pull back only 38.2% or 50% before taking off again. When that happens, an OTE order sits untouched while price runs away.
- Failed reversals in choppy markets: Not every deep pullback bounces. During high-impact news releases or messy sideways ranges, price can slice straight through 78.6% and 100%, turning a planned pullback entry into a stopped-out loss.
Common Optimal Trade Entry Mistakes to Avoid
Most OTE losses happen when traders treat the 61.8%–78.6% zone as a mechanical guarantee rather than a conditional area of interest. Avoiding three common habits can keep you out of low-quality setups.
- Placing blind limit orders without confirmation: Resting a buy or sell order right at 70.5% without watching price action means you will get filled even when momentum is crashing straight through the zone. Waiting for price to slow down first filters out many failed pullbacks.
- Forcing Fibonacci grids onto sideways markets: OTE is built for trending moves with clear displacement. Drawing retracement levels inside a tight, directionless range produces random zones that price ignores.
- Trading thin, low-liquidity sessions: Deep pullbacks during quiet overnight hours often drift erratically or widen spreads, knocking out tight stop losses before the main market session even opens.
Conclusion
This setup gives you a structured way to plan pullback trades between the 61.8% and 78.6% Fibonacci levels instead of chasing breakouts at the extremes. Like any chart pattern, it works best when combined with broader technical analysis, clear trend direction, and strict position sizing rather than used in isolation.
Remember that no entry zone can prevent losses, so always manage your risk carefully and treat this guide as educational information rather than financial advice.
Frequently Asked Questions
What is the Optimal Trade Entry in ICT?
In Inner Circle Trader (ICT) methodology, Optimal Trade Entry (OTE) is a specific pullback area between the 61.8% and 78.6% Fibonacci retracement levels. Traders look for price to retrace into this window after a strong directional move and a break in market structure before entering in the trend's direction.
What are the Fibonacci settings for Optimal Trade Entry (OTE)?
The standard Optimal Trade Entry Fibonacci settings are 0.618 (61.8%), 0.705 (70.5%), and 0.786 (78.6%), anchored by 0 (0%) at the swing extreme and 1 (100%) at the swing origin. Because most charting platforms do not include 0.705 by default, traders usually add it manually.
What is the 70.5 Fibonacci level in trading?
The 70.5% Fibonacci level is commonly treated as the midpoint between 61.8% and 78.6% inside the Optimal Trade Entry zone. Traders use it as a visual reference line to balance getting a discounted pullback price against keeping their stop loss close to the 100% swing origin, rather than treating it as a guaranteed bounce point.
Does Optimal Trade Entry work in all markets and timeframes?
Traders apply the Optimal Trade Entry zone across forex, stocks, indices, futures, and crypto on any timeframe, from five-minute charts to daily charts. However, deep pullback setups tend to behave more cleanly during active, high-liquidity market sessions when trends show clear momentum rather than during quiet, choppy ranges.
Why does an Optimal Trade Entry setup fail?
An Optimal Trade Entry setup fails in two main ways: either a strong trend bounces shallowly at 38.2% or 50% and leaves the trader behind, or a genuine trend reversal pushes straight through the 78.6% and 100% levels, triggering the stop loss. High-impact news and sideways markets increase the chance of failed pullbacks.
Keep learning
TA Masterclass
Reading charts one article at a time? Get the full method, in order.
10 lessons quiz
Start TA MasterclassThe Trader Faculty Team writes and reviews every guide together — pairing hands-on market experience with a curriculum-first approach to trading education. One good syllabus, taught in the order that makes you better.





